Ibis Introduces Adjustable Width Carbon Handlebar

by Brian Mullin on July 18, 2018

ibis_bar_adjust_building

When it comes to handlebar width, “one size fits all” doesn’t work. Not only is bar width determined by the size of the rider, it also depends on personal preference and where you ride.

But many people are reluctant to cut down their expensive bars because it’s a one-way change. As a result, Ibis has seen many riders using bars that were either too wide or too narrow. So we created a fit solution that would make it easy to experiment with different bar widths.

ibis_bar_adjust_ends

Their new Hi-Fi and Lo-Fi handlebars are adjustable. Using two 25mm wide aluminum inserts that thread into the ends of the bar, you can easily swap between 750mm and 800mm. Or, you can cut the inserts to any measurement in between.

ibis_bar_adjust_middle

For instance, take 10mm off each end for a total 780 width. Change your mind? Replacement inserts are just $15. Like our venerable MORON tubing from the 90’s, there is more on the ends of these bars.

ibis_bar_adjusted

But don’t all the really fast people run 800s? Both Robin Wallner and Lew Buchanan, two of the fastest enduro racers in the world, are just under the 6’ mark. Both of them prefer a 760mm wide bar. Their top female athlete, Bex Baraona, is around 5’7. She cuts her bars down to 740mm. Even people who prefer 800mm bars sometimes ride in places where the trail is so narrow they would prefer a shorter bar but would want the 800mm width back as soon as they’re on their home trails.

Thoughts => This is a pretty cool idea. I would like the ability to be able to alter my handlebar length, so for a day at the bike park or out on the big trails, I’d go with the wide bars, and when I know I’ll be in the deep trees I’d go for the narrower set up.

ibis_adjust_bars_lineup

The bar comes in two versions, a Lo-Fi 10mm rise and Hi-Fi 30mm rise, both with a 31.8mm clamp. Even with the added adjustability, the bars are still remarkably light. The Hi-Fi weighs 249g. The Lo-Fi comes in at 238g.

The handlebars are now shipping on XT, X01, and XX1 equipped completes. They’re also available on NX and GX builds for a small upgrade fee. The bars will be available aftermarket this Fall and will retail for $169.99. Just like their frames and wheels, the bars are backed by our seven-year warranty. If it’s their fault, they’ll fix it.

Specs

  • Material: Carbon Fiber with Aluminum Extensions
  • Maximum Width : 800mm
  • Adjustable Between : 750mm-800mm
  • Clamp Diameter : 31.8mm
  • Upsweep: 9 degrees
  • Backsweep: 5 degrees
  • LoFi :
    • Rise: 10 mm
    • Weight: 238g
  • HiFi :
    • Rise: 30mm
    • Weight: 249g
  • Price : $169.99 USD, Bar + Inserts. Replacement inserts, $14.99.
  • Warranty: Seven-year warranty. “If it’s our fault, we’ll fix it”.

{ 0 comments… add one now }

Leave a Comment

Previous post:

Next post: