The latest addition to their B-RAD System makes your bottle easier to access by shifting the bottle cage position 9mm outward and angling 10 degrees. If you have a full-suspension bike with a wide downtube and limited space in your front triangle, the B-RAD Bottle Shift positions your bottle cage away from front shock interference, but still near the centerline of the bike. It’s made with a 6061-T6 aluminum bracket and stainless steel mounting hardware, and weighs in at 24 grams, and retails for $19.95.
For further information, refer to wolftoothcomponents.com
Slots are utilized for mounting bolts so you can attach the B-RAD Bottle Shift in a low position away from your front shock for maximum clearance or in a high position for even easier access. The slots combined with dual mounting positions provides a total of 18mm of position adjustment.
On the opposite side of the B-RAD Bottle Shift bottle mount is a mount for your pump. Since many mountain bike frames are not able to fit a mounted pump, this provides an on-bike storage solution and frees up some space in your bag or jersey pocket.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment. This allows the bottle to be mounted as low as possible in the frame for improved clearance or moved upward for easier reach
- Designed to be easily flipped to provide either left or right-hand bottle access.
- The centerline of the bottle moves 18mm with the combined 10-degree tilt and 9 mm offset. This makes it much easier access to the bottle, even on hardtails or road/gravel bikes. On some full-suspension bikes it may not be possible to fit a bottle under the frame shock without this offset
- The offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes (brackets for many pumps do not clear the frame on mountain bikes)
{ 0 comments… add one now }